If you have a well pump then there are going to be times when you run into some unexpected problems and you will need to consult a well pump service. One of the common problems is the well pump not kicking on. So, here are all the reasons why it can happen.

Check The Power

First and foremost, if your well pump doesn’t turn on at all and there was recently a power outage, then you have the problem and the solution right there. A lot of the time, electricity can get interrupted in the house, especially after a bad power outage or even a tremendous weather blowout.

This can cause the power to deplete or there might be wires that are hanging onto their last breaths and a power outage takes them out completely. This can cause the pump to have no power and it obviously won’t turn on. This is bad and you need to check the circuit box or the breaker when you experience such a problem.

Sometimes, there are electrical parts in the pump as well and they can also fall victim to problems related to electricity. So you always want to check this first when any of appliances suddenly stop working before you go ahead and check other things. Nine times out of 10, the problem is with power and one small repair will fix everything.

Well Pump Is Worn Out

If you have a well pump and it’s not been maintained, then it will run into a lot of problems – one of them is not turning on. This time, the power is not an issue and you seriously need to check the pump for any worn-out parts that need repairing or replacement.

If the pump is very old, then you might want to consider replacing it completely because repairing it will cost just as much as buying a new one, so you want to free yourself from this hassle as well. This is why maintenance of a well pump is so important.

You want to check for any worn-out or damaged parts of the pump that can affect the performance of the pump in the long run. So, even though you might not like maintaining it, because who does? Well, you still have to do it.

The Pump Is Old

Speaking of old, sometimes, your well pump has had its time and now it’s time to change it completely. If you’ve never replaced your well pump before and you have a really old and outdated one, then it can sometimes be a pain when it comes to turning it on.

There is no such problem other than the fact that the pump is just too old and you need to get yourself a new one. It can be the parts in the pump, the pump assembly, or some bigger issue that is causing this problem. So, you want to be safe and get a new pump for your well, especially if it’s very deep.

Sometimes, old pumps are simply incapable of handling very deep wells and they just don’t turn on. So, you have to do something about it or else you won’t have any water in the house, which is another problem in itself.

Water Table Degradation

This problem has to do with the well itself. If the well pump isn’t turning on, then it means that the well pump is not pumping water from the well. But, after troubleshooting, you realize that the pump is working just fine. Well, that only leads to one thing and that is the well itself. Sometimes, when there are too many wells in an area and not a lot of rain or subsoil water, the water table can degrade.

The water table is the natural accumulation of water under the ground. The higher the water table, the shallower the well will be. However, the water table doesn’t stay the same forever and when a lot of people start to take advantage of this resource with no way of replenishing it, then this will be inevitable.

Mechanical Problems

Well pumps are mechanical contraptions. They’re made by connecting and joining different parts but that’s not all. These parts move a lot and they also rub and grind against each other. This can lead to wear and tear inside the pump. However, this wear and tear, when unnoticed, can lead to several problems in the pump and it will not turn on at one point. So, this is why you’ll be facing this problem.

You have a lot of water in the pressure tank and the pressure is not an issue. This is frustrating, but it is sort of what comes with the whole aspect of machines and mechanical things.

You always want to look after your well pump, because there can be a lot of times when it just doesn’t work right and it’s just the maintenance that can be the defining factor of good performance or breaking down of the pump. So, a pump comes with woes too. If it’s not kicking on, then you should consider water well pump repair Walkersville.

It’s The Well Pressure Tank

Speaking of pressure, a well pump works in this way. The pump turns on when there is a decrease in pressure in the pressure tank because you’re using water around the house. This causes the pump to suck water from the well and fill up the tank until the pressure is finally maintained.

This is a cyclic process, but there can be times when the pump won’t turn on and this is when you want to check the tank. There is a diaphragm inside it that can be torn or damaged and you need to replace it for the pump to work again.

Replace The Pressure Switch

With the pressure tank, there is a pressure switch that regulates the pressure inside the tank. Sometimes this switch can also break down. Well, this is a simple fix and you don’t need to whip out any big tools. All you need to do is change the pressure switch and you’ll see the difference right away.

There are fuses in the pressure switch that can blow out, leaving you with a pump that won’t turn on. Well, now you know how to solve this problem and it will fire up the pump like normal again.

Call A Professional

If you have tried all of these things and the well pump still won’t turn on, then you can’t do anything else but call a professional. You can call a plumber or a well pump specialist and they can take over the work from there.

See, there are just some things that you can’t fix and maybe this problem with the well pump is just that. So, it’s better to take a step back and call in the big guys. They’ll know what to do and your pump will be fixed in a zap.

Conclusion

Well pumps are machines at the end of the day, and you need to understand that there will be problems at times. So, it’s better to know about these things when you run into said problems. Furthermore, call in an expert who can inspect the pump and repair it. If the pump is failing, you will need well pump replacement Point of Rocks.